Notes on LED modules applications

The input voltage for LED modules is 12V DC, unless otherwise noted;
Low power LED modules (01 Series, 02 Series, 03 Series, 03 Series(1 diode), SMD Series) should be connected in a loop for 100 pcs to avoid voltage drop;
High power 1W / 1.5W LED modules (1W LED modules, 1W flat LED modules, 1,5W LED modules) should be connected for 50 pcs a loop;
The 3M double sided tapes are for temporary position, for long term use, suggest use silica gel to help strengthen the installation; for silica gel, suggest use high heat conducive ones;
Make sure the polarities are correctly connected, otherwise, damages may happen to modules. For LED Module, grey stands for ”+” , white for ”-”;

Notes on Power Supply application

No Short circuit allowed at the input side of the power supply;
LED power supply should be installed in venting environments, operating temperature: outdoor -20 C° to 40 C°, relative humidity 100%, indoor -30 C° to 40 C°, relative humidity 90%
No overload is allowed, please calculate as below:
Power supply rated power × 80% ÷ LED Module Rated Power;
For example, if we calculate how many 1,5W LED modules (rated power 1,5W ) can be driven by a waterproof 150W power supply, it is: 150 × 80% ÷ 1,5 = 118 pcs;